The correct steering stabilizer for a Thor Challenger 37FH Motorhome is the Roadmaster Reflex Steering Stabilizer with Mounting Brackets part # RM62VR. The best option for sway control would be upgraded anti-sway bars, the Roadmaster Rear Anti-Sway Bar part # RM-1139-148 for front and part # RM-1139-149 for rear. view full answer...
I spoke with Rear View Safety and they said any of their 5 pin cameras will work. The # RVS-776 is a compatible camera that would work well. It has a very clear image so it would be a big improvement over what you have. It's possible yours maybe had some water in it or is fogged up. view full answer...
For a hitch with that kind of capacity that you can install on your 2012 Thor Challenger Motorhome you will need the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07. This Class V hitch fits frames up to 44". It has a maximum gross trailer weight of 16,000 lbs and tongue weight of 1,600 lbs.
This is a universal hitch so that means a weld-on installation. It includes 7" tall weld-on mounting brackets and may require additional fabrication to fit your frame.. If you... view full answer...
I did some checking and your 2018 Thor Challenger 37KT has a 22k GVWR so the correct Roadmaster Reflex steering stabilizer is the part # RM-RBK22-RSSA which includes all needed hardware. The one you referenced is for higher rated GVWRs.
I attached an install video link to this page for you to check out as well. view full answer...
I looked up the AVM2210H stereo that you have in your Thor currently and it's a double din sized stereo like the iRV # IRV64FR that you referenced so this would work well as an upgrade/replacement. view full answer...
I was able to confirm the correct SumoSprings fit for your 2012 Thor Challenger 32VS for both the front and the rear of your motorhome; the correct parts are the following:
- Front: SumoSprings Rebel Custom Helper Springs # SSF-170-40-2
- Rear: SumoSprings Maxim Custom Helper Springs # SSR-187-54-1
SumoSprings are going to do a superb job of giving your Thor motorhome a more stable, controlled ride because when your rig inevitably starts to sway or experience body roll, they compress... view full answer...
I could not find any information about your Dexter 31073. However, there is still a way to see if the Bauer Products Motorhome Door Lock, part # BA64FR, will work for you. Though we can't tell if it's a direct replacement, it will work with any door that has specific dimensions.
This door lock will fit any cutout that is 5-1/4" wide x 4-1/2" tall in a door that is 1-1/4" to 1-1/2" thick.
If these measurements do not match yours, then let me know and I will find one that works for you.... view full answer...
I did check out what you have currently using the number provided, and it looks like you have a 16' Carefree awning.
With that being said, for a full replacement I recommend going with the Solera XL 12V Power RV Awning # LCV000334965-362241 with the rail # LC715217.
This awning has the same 16' wide spread as your current awning, is American made, and includes a switch kit that lets you control the awning with the flip of a switch. view full answer...
We offer the 2-Wire RV Propane Gas and Carbon Monoxide Detector in black, # RS54FR or white, # RS34FR.
RV Propane Gas and Carbon Monoxide Detectors are a fairly universal item and easily replaced. The additional face plates that come with the unit allow retrofit to most all situations. The Atwood 31013 is no longer made, its cutout size is 3-9/16" long x 3-7/16" wide. So the above options will work and the plates will allow it to be dressed out for a clean finished look.
Please note... view full answer...
Yes! What you need is a heavy duty receiver hitch welded onto your trailer to get that heavy weight capacity. I recommend the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07. It is a Class V hitch, but also has the 2" hitch receiver that is popular for hitch accessories like bike racks and cargo carriers.
With a 1,600 lb tongue weight capacity, this will be more than enough for your needs. This hitch # 41990-07 has a 7-inch drop which is determined by the mounting... view full answer...
You are indeed correct that the 24-3/16" depth of the Furrion 4-door fridge is measured with the doors on. As for removing the doors, I contacted Furrion who told me that yes, the doors can be removed on this fridge, which is the following part number:
- Furrion RV Refrigerator - 4 Door - 14 Cu Ft # FCR14ACBQABL
They said that in order to do this what you'll need to do is unscrew the hinges for the doors, and you'll need to start with the top doors first before you'll be able to remove... view full answer...
We do have a steering stabilizer for your 2015 Thor Challenger 37KT motorhome on a Ford F-53 chassis. The correct fit is the following:
- Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes # RM42RR view full answer...
Here is a list of the Jensen radio antennas we currently carry. You can compare these with the one on the roof of your 2016 Thor Challenger 37LX to determine if we have an exact replacement or if you will need to remove the antenna from your roof to install a new antenna. Most all radio antennas will use the same style connector going into the stereo if you replace the antenna cable as well.
Jensen Antenna - Top or Side Mount - Rubber Mast # 44US01R
Jensen Antenna - Rooftop or Side Mount... view full answer...
The Roadmaster Direct-Connect Base Plate Kit part # RM-524459-5 is a great option for a 2020 Ford Ranger (All Models) and what I recommend using. If you don't already have a tow bar, it will pair perfectly with the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar part # RM-676. In regards to the wiring, the Roadmaster Universal Hy-Power Diode Wiring Kit part # RM-154 will integrate into the umbilical and trailer connector that comes with the tow bar or it could be used without.
If... view full answer...
The 2018 Thor Challenger 37TB is on a Ford F-53 Chassis so the correct Roadmaster Reflex Steering Stabilizer is part # RM-RBK25-RSSA. view full answer...
We do have an inflation kit that fits the 22-1/2 inch diameter wheel size you have on your 2016 Thor Challenger with the Wheel Masters # WM8004 which was designed for your wheel diameter of 22-1/2 inch.
Our customers have all left great reviews on this kit and have stated that if you get them installed tightly there is no leak. view full answer...
From your outlet, you will first use the Mighty Cord Dogbone RV Power Cord Adapter - 50 Amp Female to 15 Amp Male - 12" # A10-1550VP or the Power Grip RV Power Maximizer # CAM55025 and then the circuit protector # CAM55306 to protect your RV electrical system followed by the 50 amp power cable to your RV. There is nothing you need to do differently inside your RV as it is already designed for your refrigerator and other appliances to function. view full answer...
Since there isn't a guide to tell us the entry handle used on your compartment door you'll need to remove the backing plate of the handle to get a look at the cutout hole and measure it. Once we know the dimensions of the hole we can then look at replacements.
For example, the Global Link RV Baggage Door Slam Latch # 295-000078 requires a 3-7/8" wide x 3-3/8" tall cutout hole. view full answer...
We do have an option that will work really well for your 2012 Thor Challenger 32VS to help control and stabilize your motorhome during crosswinds, which is an anti-sway bar from Roadmaster:
- Roadmaster Rear Anti-Sway Bar # RM-1139-149
The reason a rear anti-sway is the best option to stabilize and improve your motorhome's ride is because the aftermarket anti-sway bars are better constructed with higher-strength, thicker steel than OEM sway bars. This means the bars are stronger with... view full answer...